Special water protection measures by avoiding water-borne injuries 2. Limiting water penetration during water penetration. Advantages of adjusting the drying time 1. Use any part or surface made of water infiltration or plastering mortar. Use basements on the ground floor, interior and exterior walls, roof areas, water containers and wastewater disinfectants. Casari -Protecters – Concrete Structures M (DN-02)
1. Maintain the protection of the concrete by minimizing the surface of the paste, minimizing the smoothness of the surface and increasing the elasticity of the water.
2. Additionally, no additional water will be added because of the improved concrete quality
3. Improve water softening and water resistance
4. Protect reinforcement from corrosion and reinforce the concrete and reduce heat loss.
ISOFLEX-PU 500 is applied by brush or roller in 2 layers. The first layer is applied 2-3 hours after priming and while PRIMER-PU 100 is still tacky. The second layer should be applied crosswise after 8-24 hours, depending on the weather conditions.
Consumption: approx. 1.0-1.5 kg/m2, depending on the substrate.
It is recommended to reinforce ISOFLEX-PU 500 with the polyester fleece along the edges at the junction of the flat roof with vertical elements (parapet, stairwell termination, etc.), pipe joints, ventilation joints, metal element joints, etc. As soon as the polyurethane primer PRIMER-PU 100 has set (approx. 2-3 hours), a coat of the polyurethane waterproofing liquid membrane ISOFLEX-PU 500 is applied along the junctions and, while it is still fresh, a 10 cm wide strip of polyester fleece (60 g/m2) is embedded. After 8-24 hours, depending on weather conditions, a second coat of the polyurethane waterproofing liquid membrane ISOFLEX-PU 500 is applied. After 8-24 hours, depending on the weather conditions, a third layer is applied in the spots where reinforcement has been used for its full coverage.